01-08-2009 06:10 PM - edited 03-15-2019 03:24 PM
A video conference created manually in the MCU Interface 3515MCU, should be reflected as a endpoint in the Gatekeeper (with the command show gatekeeper endpoint specifically with the e.164ID) ?
The MCU is registered in the Gatekeeper
01-08-2009 10:33 PM
yes, whats the output for show gatekeeper endpoints?
If it is registered yes...
01-09-2009 06:14 AM
The register a MCU in Gatekeeper is:
GK_STGO01#show gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
--------------- ----- --------------- ----- --------- ---- -----
172.16.2.2 59971 172.16.2.2 32839 CUCM_STGO VOIP-GW
H323-ID: Trunk_GK_STGO01_1
Voice Capacity Max.= Avail.= Current.= 2
172.17.1.2 1720 172.17.1.2 1719 CUCM_STGO MCU
H323-ID: MCU_STGO01-172017001002
E164-ID: 72
E164-ID: 85
E164-ID: 84
E164-ID: 80
E164-ID: 81
Regards
01-09-2009 07:20 AM
For example, if I create a new conference through of the Web administration of the MCU. With a Prefix and Unique Number of 81(ServicePrefix) and 555(UniqueNumber), the new number formed 81555, should be displayed as a result of the command show gatekeeper endpoints?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: