Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MCU gatekeeper

A video conference created manually in the MCU Interface 3515MCU, should be reflected as a endpoint in the Gatekeeper (with the command show gatekeeper endpoint specifically with the e.164ID) ?

The MCU is registered in the Gatekeeper

3 REPLIES
Green

Re: MCU gatekeeper

yes, whats the output for show gatekeeper endpoints?

If it is registered yes...

New Member

Re: MCU gatekeeper

The register a MCU in Gatekeeper is:

GK_STGO01#show gatekeeper endpoints

GATEKEEPER ENDPOINT REGISTRATION

================================

CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags

--------------- ----- --------------- ----- --------- ---- -----

172.16.2.2 59971 172.16.2.2 32839 CUCM_STGO VOIP-GW

H323-ID: Trunk_GK_STGO01_1

Voice Capacity Max.= Avail.= Current.= 2

172.17.1.2 1720 172.17.1.2 1719 CUCM_STGO MCU

H323-ID: MCU_STGO01-172017001002

E164-ID: 72

E164-ID: 85

E164-ID: 84

E164-ID: 80

E164-ID: 81

Regards

fixie rider
New Member

Re: MCU gatekeeper

For example, if I create a new conference through of the Web administration of the MCU. With a Prefix and Unique Number of 81(ServicePrefix) and 555(UniqueNumber), the new number formed 81555, should be displayed as a result of the command show gatekeeper endpoints?

145
Views
0
Helpful
3
Replies