Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Measurement Based CAC - Dial-peer Selection - Help

I have a very interesting case of a customer's router(gateway)across a satellite link

The integrity of the link varies based on multiple satellite factors.

I pre-configured two dial-peers using g729A, one with the default 20 bytes size and the other with 60 bytes.

How can I select dial-peers based of the performance of the link?

I know that "monitor probes can test the link", but my question refer to the tool that can differentiate and prefer the results of the probe and choose one dial-peer based on performance.

By selecting the proper dial-peer I can improve the quality of the voice.

Something similar to floating static routing using metrics based on BW,Delay, reliability of the link.

I will really appreciate your inputs

Thank you, all

1 REPLY
Silver

Re: Measurement Based CAC - Dial-peer Selection - Help

These are the two methods to enable Call Admission Control (CAC) in a Cisco CallManager IP Telephony network:

Location based

Gatekeeper based

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/3_1_1/ccmsys/a02cac.html

223
Views
0
Helpful
1
Replies