<p>Having 3 locations.Two locations are having local Callmanager group and other location having SRST. There are two Media Resource Groups are configured.</p>
<p>SRST location and one loaction are sharing same Media Resource group with different Device Pool. In SRST location MeetMe and Ad-Hoc conference working fine but other location it's not working(the Media Resource are local for this location).</p>
<p>If i select second Media Resource Group for this location, MeetMe and Ad-Hoc conference works fine.</p>
First location Publisher & 1 subscriber installed, second location 1 suscriber installed and third location SRST routers installed.
Media Resource Group is comman for Location 1 & 3. But in location 1 where the CCM are installed Conferencing is not working,but selecting other Media resource group (created for location2),conferencing will work fine.
DO you have transcode resources configured? The software based conference bridge will not support anything but G.711. If you're running resources that are having to connect between locations via G.729 based on locations/regions settings, it won't work without transcode resources in place, and those are only done in hardware.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...