Hi I want to ask if anyone knows how I can meet the following requirement from a customer regarding call waiting.
A phone called phone A has the call waiting option, the phone A line 1 is busy because the user is talking with another user, then another Ip phone (phone B) calls to phone A, how to make the phone B out a message on the screen indicated that the phone A line 1 is 1 busy.
The closest thing you can get would be to use the BLF for call lists enterprise parameter, but that's before you call the user.
In CUCM there's no way to show a message the user is busy when you call him.
Configuration Checklist for Presence
The Presence feature allows a user (watcher) to monitor the real-time status of another user at a directory number or SIP URI from the device of the watcher. A watcher can monitor the status of the user by using the following options:
•Missed call, placed call, or received call lists in the directories window
•Shared directories, such as the corporate directory
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...