04-03-2008 01:02 PM - edited 03-15-2019 09:50 AM
Where would you find out the max number of participants you can have on a Meet Me call? Thanks!
Solved! Go to Solution.
04-03-2008 02:02 PM
under the service parameters for CUCM look for:
Maximum Meet me conference Unicast
that's the current max
HTH
javalenc
if this helps, please rate
04-03-2008 01:41 PM
Mike,
The maximum number of participants supported by a software conference is 128. However, if the IPVMS application is coresident with Callmanager, the maximum is 48. See the following link.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_1_3/ccmsys/a05confb.html#wp1035397
Hope this helps. If so, please rate the post.
Brandon
04-03-2008 01:48 PM
So what's the easiest way in basic terms to figure it out? Ha!!
Under conference bridges, we have 2 Software conference bridges and 8 hardware conference bridges through 2 6608 blades in 2 switches.
Thanks!
04-03-2008 02:02 PM
under the service parameters for CUCM look for:
Maximum Meet me conference Unicast
that's the current max
HTH
javalenc
if this helps, please rate
04-03-2008 02:24 PM
Currently set to 16. Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide