Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Meet-Me Max Participants Problems

Im having a problem with meet-me, I have configured the "Maximum Meet me conference Unicast" to 14, but it seems that only 8 people can join. I have tested several times and I cant get more than 8 people to join. I have the setting set to 14 for each CM server. Is there any other options that would restrict this? Does it matter if the participants are coming in from the outside vs. the inside?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Meet-Me Max Participants Problems

you'll need to reset the devices that are using it, might wanna do it after-hours.

once you do it give it a try and you should get your 14 users

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
4 REPLIES
Cisco Employee

Re: Meet-Me Max Participants Problems

you're using a HW CFB and not the SW CFB, change your MRGL to use the SW CFB in first place

HW CFB only accept 8 conferencees per conference

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Meet-Me Max Participants Problems

Thanks for the Advice, I do see that the Hardware Resource Group is first and then software. What will be impacted by changing this? Says it is being used by all of our devices...

Cisco Employee

Re: Meet-Me Max Participants Problems

you'll need to reset the devices that are using it, might wanna do it after-hours.

once you do it give it a try and you should get your 14 users

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Meet-Me Max Participants Problems

Thanks!

455
Views
0
Helpful
4
Replies
CreatePlease to create content