Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Meet me on Cisco Conference Station 7937G

My Cisco Conference Station 7937 doesn't show the meet me button to initiate meet me conference. My station (ext) is not the admin to host the meet me conference. It is another ext. (130) which i have assigned for meet me conference. I want to know what i need to do to show the meet me button on the conference station.

4 REPLIES
New Member

What kind of CallProcessing

What kind of CallProcessing System are you using? As far as I know, on CUCM starting a meet-me conference from a 7937 is not supported/available.

 

See also: https://supportforums.cisco.com/discussion/11665931/7937g-meet-me-option

 

Regards,

 

Ulderico

 

New Member

I have UC560 Cisco Call

I have UC560 Cisco Call Manager express. 

New Member

I have just set this up on

I have just set this up on our 7937G (now end of sale!), connected to CUCM 8.6.

I just had to make a custom softkey template and add the "Meet Me" softkey to it.  I had to remove the CallFwdAll button, as all 4 buttons were already allocated.

The button appeared on the phone (replacing the CallFwdAll button) after the next reset.

So it is certainly possible.

I assume that James' answer above works for CME.

Regards,

Paul

Hi,Try adding the commands

Hi,

Try adding the commands below to your configuration - you will need to change the template and ephone numbers from 1 to suit your config.

 

ephone-template 1
conference admin
softkeys seized Redial Endcall Meetme
exit

ephone 1
ephone-template 1
reset

Not sure whether this will work with the 7937.

There is a good blog on CME conferencing at the link below:

http://ccievoiceexpert.com/?p=262

HTH

255
Views
0
Helpful
4
Replies
CreatePlease login to create content