cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
432
Views
0
Helpful
4
Replies

MeetingPlace Express - adjusting clock

pijssel
Level 1
Level 1

Hi all,

I just installed a MPX 2.0 server and it runs fine. But now I want to change the time on the server, because I misconfigured it in the first step...

I read in the documentation that it is not possible to change the clock without reinstalling the MPX server.

Does anyone know how I can change the clock without haveing to reinstall the whole server?

With kind regards,

Paul van den IJssel

Digacom

The Netherlands

4 Replies 4

thisisshanky
Level 11
Level 11

If I remember right, you can use the "net" command from CLI to configure time.

HTH

Sankar

PS: please remember to rate posts!

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

Nope, I allready tried this :(

bill.watts
Level 1
Level 1

If you run the net command and select Option 8 do you see any listings for time servers? If not, you can set up to 3 NTP servers to point to.

david.mackill
Level 1
Level 1

Hi, I just did this.

SSH into the MPX box (or open a terminal session) elevate yourself to root level (type: SU)then use the date command to change the time:

# date -s "16:15:00"

then reboot the server (type: reboot)

after that the MPX server displays the correct time.

tested on version 2.0.3.35

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: