Re: MeetingPlace Express Automatic Close The Meeting?
I lookup the guide of this parameter, may not indicate the meeting is start in 30 minute but nobody attend system will Automatic Close The Meeting.
reference doc:During the meeting ID end guard time, users who try to attend the meeting hear or see on the screen: “The meeting has ended.” After the meeting ID end guard time period, users hear: “This is not a recognized meeting ID number.”
Recommendation: 15. Nevertheless, to ensure that meeting IDs are available for reuse, decrease this value if the number of simultaneous meetings to be held on your system is about the same as the number of available meeting IDs.
I will try change that parameter NBD, is that parameter work i will post ASAP, still thx pratik's ardent.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...