Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Meetme max users issue CUCM 9.1.2

Hi Guys,

I have a new installation of cucm 9.1.2 in a cluster of four servers (1 Pub and 3 Subs) and I configured just a regular meetme number, the issue that I have is that I already changed the Maximum MeetMe Conference Unicast parameter value under the Clusterwide Parameters (Feature - Conference) from 4 to 10 but the system is only allowing 4 uses in the meetme conference.

I have already verified my SW CFB, HW CFB, MRG and MRGL configuration and I have enough resources to have more than 4 users in the meetme conference, I did a "normal" conference adding users from a phone and I was able to add up to 10 (wich is the value that I configured under the maximun ad hoc conference parameter).

What do you think can be causing this????

Thanks in advance for your comments.

3 REPLIES
Cisco Employee

Meetme max users issue CUCM 9.1.2

Which CFB are you using?

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Meetme max users issue CUCM 9.1.2

Hello Jaime,

I have configured a MRG with the SW CFB that the CUCM has by default and a MRG with two HW CFB configured like this:

dspfarm profile 1 conference video guaranteed-audio  (I have video phones)

codec ilbc

codec g722-64

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

codec h264 cif

maximum sessions 16

associate application SCCP

In the MRGL I have the HW before de SW, if I make a normal conference with a phone I can add up to 10 members...the issue seems to be just with the meetme.

One thing that I noticed is that when I make a conference, the phones are not using the hw resources instead the sw ones, I removed the MRG SW from the MRGL and then the phones were using the hw resources.

The order that I have configured is HW and then SW in the MRGL.

New Member

Meetme max users issue CUCM 9.1.2

Hi,

At the end the issue was that in the HW CFB was not configured the "

maximum conference-participants", I configured that and then it worked ok with 8 users:

dspfarm profile 1 conference video guaranteed-audio 

codec ilbc

codec g722-64

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

codec h264 cif

maximum conference-participants 8

maximum sessions 8

associate application SCCP

It seems that the SW CFB only support 4 participants per conference, right?

Regards,

553
Views
0
Helpful
3
Replies