We've had our CCME/CUE installation running for a couple of months now, but I've noticed that all the IP Communicator clients we have (on 2k sp4 & xp sp2) are all consuming a substantial amount of memory.
They start of OK, around 55-60MB consumed (as shown in the VM size column, not "Mem Usage" on task manager). As time goes on, this creeps up. It's not unusual for me to find it running up at 600+MB over 24 hours. Can other users confirm this, or shed light on to why this might be the case ?
FWIW, I've disabled the "Enable Logging" feature where I've found it turned on, and we're using IPC 2.1.1, CCME 4.1 on IOS 12.4(11)T, on a 2851ISR.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.