Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Memory upgrade for MCS 7816-I3

Hhello, I'm wanting to increase the memory of a mcs 7816-I3, but purchase a kingston memory and does not turn on.

I'm must use only the IBM memories to work? Do you have any model of memory to suggest?

Sorry my english

Thanks

4 REPLIES

Memory upgrade for MCS 7816-I3

Hello Jean,

Did you check the data sheet

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/data_sheet_c78-478928.html

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

The kingston memory meet this requirements of the datasheet?

If these memory mett this requirements you can open a case on Cisco PDI to see if they recommend any model of memory..

Other thing this server is a IBM machine you can check on IBM documentation to see if this server accept other fabricant memories...

Rate this post if  is useful to you

Thanks

Leonardo Santana

Cisco Employee

Memory upgrade for MCS 7816-I3

"If these memory mett this requirements you can open a case on Cisco PDI to see if they recommend any model of memory.."

We do not handle this kind of queries, this is something you would need to discuss with pre-sales. We only handle technical queries on the UC products but specs and what HW/memory to buy from Cisco or any other vendor is beyond our scope.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Memory upgrade for MCS 7816-I3

Sorry Java i didnt know, thanks for the info!!!!!

Jean you can check on IBM and see the memories supported.

Did take a look on the server manual?

Community Member

Memory upgrade for MCS 7816-I3

The memory what we buy was:

Kingston: KVR667D2S4P5/2G

2GB 667MHz DDR2 ECC Reg with Parity CL5 DIMM Single Rank

567
Views
4
Helpful
4
Replies
CreatePlease to create content