Message Waiting Indicator with Analog VG 204 & 224 ports. Call Manager 8.5
I have not been able to get either the shudder tone, or lamp indicator to function with analog ports from a VG204 or VG224. Any help will be appreciated. MWI is enabled in Unity. MWI is working on all IP phones. Only on analog ports are they not working. Maybe I should start with this question first. Is this even a capability on analog phones connected to analog ports?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...