Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Message warning: DSPs 1 in slot 0 are using non-defaultConference firmware

Hi Guys,


The gateway of my customer is presenting locked the voice-port. I found the message below and would like know if this problem can be relationship about my problem. If don´t have I believe that this is problem too.

OURCUCME01#sh voice dsp group slot 0
dsp 1:
  State: UP, firmware: 26.8.0
  Max signal/voice channel: 16/16
  Max credits: 240
  num_of_sig_chnls_allocated: 6
  Transcoding channels allocated: 0
  Group: FLEX_GROUP_VOICE, complexity: FLEX
    Shared credits: 210, reserved credits: 0
    Signaling channels allocated: 6
    Voice channels allocated: 1
    Credits used: 30
    Voice channels:
      Ch02: voice port: 0/0/2, codec: g729br8, credits allocated: 30

dsp 2:
  State: UP, firmware: 26.8.0
  Max signal/voice channel: 16/16
  Max credits: 240
  num_of_sig_chnls_allocated: 0
  Transcoding channels allocated: 0
  Group: FLEX_GROUP_CONF, complexity: CONFERENCE
    Shared credits: 0, reserved credits: 240
    Codec: CONF_G729, maximum participants: 8
    Sessions per dsp: 2

dsp 5:
  State: UP, firmware: 26.8.0
  Max signal/voice channel: 16/16
  Max credits: 240
  num_of_sig_chnls_allocated: 0
  Transcoding channels allocated: 0
  Group: FLEX_GROUP_CONF, complexity: CONFERENCE
    Shared credits: 0, reserved credits: 240
    Codec: CONF_G729, maximum participants: 8
    Sessions per dsp: 2

dsp 6:
  State: UP, firmware: 26.8.0
  Max signal/voice channel: 16/16
  Max credits: 240
  num_of_sig_chnls_allocated: 0
  Transcoding channels allocated: 0
  Group: FLEX_GROUP_CONF, complexity: CONFERENCE
    Shared credits: 0, reserved credits: 240
    Codec: CONF_G729, maximum participants: 8
    Sessions per dsp: 2

The dsp 1 is showing the different configuration about another DSP. Any have idea what solve this problem?

Thanks,

Wilson

2 REPLIES
Hall of Fame Super Gold

Message warning: DSPs 1 in slot 0 are using non-defaultConferenc

Start updating IOS.

New Member

Message warning: DSPs 1 in slot 0 are using non-defaultConferenc

Hi Bevilacqua,

I am sorry, but, I didn´t understood. The IOS that is running in the gateway is more recently.

Thanks,

Wilson

218
Views
0
Helpful
2
Replies
CreatePlease login to create content