Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

MGCP, CCM and 3845 routers

We're using CCM 4.1 with a 3845 to create an MGCP gateway. We keep running into an issue because somehow the CCM hostname keeps getting inserted into the MGCP config in the router even though we programmed it as an IP address. Because of this we keep getting a domain name issue and the gateway will not register. We've used a "no ip domain lookup" command, which is still in there, but it doesn't seem to have any effect.

2 REPLIES
Cisco Employee

Re: MGCP, CCM and 3845 routers

remove the line ccm-manager config server to avoid that

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: MGCP, CCM and 3845 routers

Thanks! That seemed to work perfectly. Now, we're having a problem with the controller coming up so the MGCP gateway will not register properly. We'll figure it out, I guess.

107
Views
0
Helpful
2
Replies
CreatePlease to create content