MGCP commands got erased

[pepito1983]

Hi i have a callmanager 4.1 that has 2 fxs and 4 bri registered using MGCP. The problem is that the mgcp commands that associate this interfaces to the call agent got erased suddenly loosing connection qith the callmanager.

Do anyone had this problem before, thanks in advanced.

Pepe

[Jaime Valencia]

by any chance did you erased the GW in CUCM and had configured the ccm-manager config??

was that the only part that was lost?

HTH

javalenc

if this helps, please rate