I understand that we need to ensure that the host name of the router matches the domain name in CCM and if you want " "hostname.cisco.com" then you need add the ip domain commend, as well as making the router name the same as well. The question I have is does the router name need to be in DNS for MGCP . When the router tries to registers with CCM as below you can see the IP address of the Router 22.214.171.124
*Jul 25 08:54:42.499: cmapp_host_fsm: New state REGISTERING for host 0 (126.96.36.199)
*Jul 25 08:54:42.499: MGCP Packet sent to 188.8.131.52:2427--->
but then request to CCM as below I do not see any response
RSIP 5231303 *@BESRST.be.net.intra MGCP 0.1
I need to check the local Firewall but I just need to confirm the DNS quesiton-should the call manager use the IP address of the router which is sent by the router when it tires to register? -*Jul 25 08:54:42.483: cmbh_open_tcp_link: Opening TCP link with Rem IP 184.108.40.206, Local IP 220.127.116.11, port 2428
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.