Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

MGCP FXO Port for paging system

Hi,

Does anyone know how in CCM 5.1(2) you can set up a MGCP controlled port to just go offhook and not send the digits dialed?

In CCM 4.x, setting up a route pattern such as 1234. with PreDot digit strip worked and port went offhook and no digits were sent. Tried the same in CCM 5.x and get unknown number and reorder tone. When I change the route pattern to just 1234 without the dot it connects to the port but also sends 1234 which results in reorder tone back from the paging system. Is there another way to just get a FXO port to go offhook with MGCP and not send digits out with MGCP?

Got it working by doing H323 for now, but would like to stick with MGCP since everything else is MGCP here.

  • IP Telephony
1 REPLY
Cisco Employee

Re: MGCP FXO Port for paging system

It seems that you are hitting this bug CSCsi19351.

Make sure that you have the CallManager version that has the bug integrated.

294
Views
0
Helpful
1
Replies
This widget could not be displayed.