Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

MGCP fxr-package

What exactly does mgcp fxr-package do on an MGCP gateway?

I've seen mention that it's needed when using T.38, but we're not using T.38 for faxes.

Thanks,

GTG

Please rate all helpful posts.
5 REPLIES

MGCP fxr-package

Yes, FXR package is used for T38 fax negotitation. If you are not using T38 capabilities, its not required.

Please rate useful posts.

Please rate useful posts.

Re: MGCP fxr-package

Hi

The configuration for a GW that does T38 , you can use FXR as the below:-

no ccm-manager fax protocol cisco              

no mgcp fax t38 inhibit 

mgcp package-capability fxr-package

mgcp default-package fxr-package

mgcp fax t38 nsf 000000

no mgcp fax t38 ecm

Please find the below link:-

http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_configuration_example09186a0080bf23f2.shtml

Thank you

please rate all useful information

MGCP fxr-package

Thanks, but I actually want the opposite: I do NOT want to use T.38.

GTG

Please rate all helpful posts.

Please rate all helpful posts.

MGCP fxr-package

Hi

This is up to you , if you need to use passthrough. This will be better as the below:-

no ccm-manager fax protocol cisco                             

mgcp modem passthrough voip mode nse

mgcp modem passthrough voip codec g711ulaw

Thank you

please rate alluseful information

MGCP fxr-package

Hi

FYI , please also find the below:-

Configuring T 38 for MGCP gateway

mgcp fax t38 ecm

mgcp fax t38 gateway force

no mgcp fax t38 inhibit

Configuring Fax passthrough for MGCP gateway

mgcp modem passthrough voip mode nse

no ccm-manager fax protocol cisco

Configuring Fax relay for MGCP gateway

mgcp fax t38 inhibit

no mgcp fax t38 gateway force

ccm-manager fax protocol cisco

Thank you

please rate all useful information

610
Views
5
Helpful
5
Replies
CreatePlease to create content