Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MGCP Gateway Not Registered on CM

Hi, I have a 2851 MGCP Gateway with PRI QSIG connection to a PBX.

On the VG I see :

sh ccm

MGCP Domain Name: VG-Office.Pippo.it

Priority Status Host

============================================================

Primary Registered 172.16.8.41

First Backup None

Second Backup None

Current active Call Manager: 172.16.8.41

Backhaul/Redundant link port: 2428

but on a CM I see : NOT REISTERED

sUGGESTIONS ????

THANKS

2 REPLIES
Bronze

Re: MGCP Gateway Not Registered on CM

hi,

first check if your domain name "VG-Office.Pippo.it " in configured in ccm is the same as configured on the router.

check if you have selected the right gateway, port, interface type.

regards

mehmet

New Member

Re: MGCP Gateway Not Registered on CM

Also check that your controller (t1 / e1?) is up and operational. I've seen a MGCP controller router not show as registered until it was plugged into an operational E1 line and the controller brought up.

220
Views
0
Helpful
2
Replies
CreatePlease to create content