Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MGCP Gateway Problem

Hi all,

voice-port 0/2/0


voice-port 0/2/1


ccm-manager mgcp



mgcp call-agent service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp validate domain-name


mgcp profile default


dial-peer voice 100 voip

destination-pattern ....

session target ipv4:


dial-peer voice 1000 pots

service mgcpapp

port 0/2/0

Above is my configuration of mgcp gateway with VIC2-2FXO... its registered with CCM and was working fine...all of a sudden it stopped working.... when I dial on the number terminated on FXO, call dont go through.... I have attached a file with sh ccm-manager and debug mgcp events output.... Any help ??



New Member

Re: MGCP Gateway Problem

What version of CCM are you using ?

New Member

Re: MGCP Gateway Problem

CCM 4.1(2)...and the voice gateway is 2811.

Here is the show version as well .

KHI-FTC-RO-I-A8M1-02#sh ver

Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.3(14)T


Technical Support:

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Wed 22-Mar-06 18:40 by pwade

ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)

KHI-FTC-RO-I-A8M1-02 uptime is 3 days, 17 hours, 10 minutes

System returned to ROM by power-on

System restarted at 17:53:53 GMT Tue Jun 19 2007

System image file is "flash:c2800nm-adventerprisek9-mz.123-14.T7.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to

Cisco 2811 (revision 53.51) with 247808K/14336K bytes of memory.

Processor board ID FHK0918F098

2 FastEthernet interfaces

62 Serial interfaces

2 Channelized E1/PRI ports

1 Virtual Private Network (VPN) Module

4 Voice FXO interfaces

DRAM configuration is 64 bits wide with parity enabled.

239K bytes of non-volatile configuration memory.

62592K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102


Any suggestion.Thanx in advance