CCM cluster with version 220.127.116.1100-5, one remote site voice gateway Cisco 2821 IOS 12.4.15T4 with T1/PRI for PSTN access.
We found that from voice gateway itself, it shows the gateway has been registered to the callmanager, and it can accept inbound/outbound PSTN calls. However on the CallManager webpage, most of the times it shows "Unregistered" even from CCM I issued "reset", the voice gateway received the configuration from CCM, but on webpage it still displayed "unregistered". I tried to restart callmanager servers' "RIS data collector" service, and rebooted the voice gateway a few times, same issue existed.
This status display problem is not existed on the other site's Cisco 2821 voice gateway, only on this site.
Does anyone have experienced this issue and solved the problem so that on Callmanager, we can see the right status information of the voice gateway?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...