Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

MGCP Gateway Registration Failure with CCM 5.1

Hi all,

I summarize you my problem;

When you use an MGCP gateway in Cisco CallManager 5.1, the gateway shows as registered in show ccm−manager command output, but gateway shows as unregistered in the Cisco CallManager Administration page.

This issue is emerged after one day (or more) that the registration has been done.

thanks

best regards

Michele

3 REPLIES
Hall of Fame Super Silver

Re: MGCP Gateway Registration Failure with CCM 5.1

What version of IOS are you using? can you post your confi?

Chris

New Member

Re: MGCP Gateway Registration Failure with CCM 5.1

Hi Chris,

Ios Version is : 12.4(11)T.

In attach the configuration file.

Thanks

Michele

Green

Re: MGCP Gateway Registration Failure with CCM 5.1

I see that you are using BRIs...

Please check this link, make sure in CCM tavolare_cormons is being as gateway.

Check this troubleshooting guide:

http://www.cisco.com/en/US/products/ps6441/products_configuration_guide_chapter09186a0080541c9f.html#wp1125336

854
Views
0
Helpful
3
Replies
CreatePlease to create content