I have a 2801 router configured a MGCP however when I`ve added the commends amongst others call-agent ...., ccm-manager config I do not see it registered being registered. Also I not see the XML confirmation on the CLI of the router when it down loads the Config file. There is a Firewall in between but I`ve allowed the IP address of the CCM and the PORT 2427. What I`m I missing
Attached are some files with sh run, debug ccm-manager. The GW is failing to register to the CUCM, there is a firewall in the middle and the rules are from CUCM to SRST
From SRST to CUCM
The host name matches the GW in CUCM
There are no Dial-peers at the moment as I want just MGCP so I understand I do not need dial-peers but will be using it as SRST so I will add them but again I think I do not need to add the commend "application mgcpapp" under the DIAL-Peers as they will be H323. If I add ccm-manager fallback then the GW`s E1 comes up connecting to a local PABX using h323
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...