Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

MGCP GW ring back issue

Hi,

    We are facing problem with hearing ring back over PSTN.

PSTN PRI----->MGCP GW. When user receives a inbound call over PSTN, the calling party hears busy tone, but the IP Phone/analog is not actually busy. This is happening with internal calls (extn to extn) as well, i mean no PRI/IP trunk has been used. This issue is intermittent.

CUCM: 8.6.2

MGCP GW 12.4

Thankyou

       PC

201
Views
0
Helpful
0
Replies
CreatePlease to create content