We have just migrated a customer from non cisco PBX to Callmanager 8.6, with a 2911 gateway using MGCP on ISDN PRI 30 channel link.
Calling number was displaying ok, but now we have moved the ISDN PRI line across to callmanager, we are not seeing the external caller number, it is showing as unknown. I looked at the debugs from the gateway (output below) and cannot see it arrive. Is their a setting on Callmanager or Gateway that I need to enable ?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...