Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MGCP International Call-Forward

Hi NetPro's,

I have an issue regarding an international call-forward. Here's the Problem:

1. Incoming call from e.g. Belgium (+32).

2. Call is forwarded to a cell-phone.

3. cell-phone displays +4932.... (+49 is for germany and prefixed to the original number)

The customer has to edit the number and correct it manually, which is not very useful ;-(

We have a Cisco CallManager Version 4.2(3) and a MGCP-controlled gateway with PRI Interfaces.

I have already controlled the service parameter setting, there is nothing to find.

For outgoing calls I use an external phone number mask in "national" format, this is also configured in the mgcp configuration (calling party IE=national), is there maybe a problem?

Do I have to configure an international ext-pho number mask and set the gateway calling party to "international"?

Best regards

Torsten

1 REPLY
Silver

Re: MGCP International Call-Forward

Paste the following sh command

sh ver

sh runn

sh isdn stat

sh diag

sh voice port summ

sh voice call summ

sh voice dsp

configure on the GW

service timestamp deb date msec

service timestamp log date msec

debugs on the GW at the same time

debug isdn q931

deb voip ccapi inout

128
Views
0
Helpful
1
Replies