Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

MGCP PRI

I am trying to bring up 3 pri's (new install) and I am receiving this when I debug "isdn q921" *Feb 11 14:17:24 MST: ISDN Se0/0/0:23 Q921: S4_SABME: BACKHAULED & vsc_wants_L2_up = FALSE

IDEAS? I have verified pri switch type

1 ACCEPTED SOLUTION

Accepted Solutions

Re: MGCP PRI

It looks like you need to do this:

interface Serial 0/0/0:23

no isdn bind-l2 q921

hth,

nick

3 REPLIES
Cisco Employee

Re: MGCP PRI

take this command from the config:

isdn bind-l3 ccm-manager

then try again

confirm domain name config on CCM is hostname+domain (if configured)

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: MGCP PRI

It looks like you need to do this:

interface Serial 0/0/0:23

no isdn bind-l2 q921

hth,

nick

New Member

Re: MGCP PRI

I got them up, I had to remove the binding from the serial int.

538
Views
5
Helpful
3
Replies
CreatePlease to create content