MGCP/SRST help

ciscouser55 · ‎02-06-2008

I understand that I need to do the following for mgcp

mgcp

mgcp call-agent ........ service......version 0.1

ccm-manager mgcp

If I want CCM to download everything else I need the following ?

ccm-manager config server x.x.x.x - ip address of ccm

ccm-manager config

If I have FXS port on the GW as well do I need the following

Add the MGCP applicationciation to the Dial Peers for the ports or can I just configure them in CCM ?

Is this correct ?

SRST

I have a bundled SRST from Cisco, how do I know the S/W level of it - sh ver? what do I look for ?

Also If I have SRST with the router do I just need to add the following

ccm-manager fallback-mgcp

.

application

global

service alternative default - for h323 only

Rajesh Revuru · ‎02-06-2008

type in "sh call-manager all" and it will display SRST version at the top.

You would have to define ephone-dn and ephone as minimum to enable SRST after you type ccm-manager fallback-mgcp

ciscouser55 · ‎02-06-2008

Do you mean max-phone, max-dn etc?

Rajesh Revuru · ‎02-06-2008

Yep, also following the complete configuration guide.