mgcp with e&m

[mrugeshpatel_2]

Is there a doc that explains how to configure mgcp with e&m?

[arcaidy76]

Here is one for a CAS trunk. Is that what you are looking for?

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/vvfax_c/callc_c/ccm_c/intcnf3.htm

[mrugeshpatel_2]

I want to integrate E&M card to a nortel pbx. So I have two analog E&M ports that hooks up to the noretel pbx.

[arcaidy76]

Try these.

http://www.cisco.com/warp/public/788/products/2em_vic.html

http://www.cisco.com/warp/public/788/signalling/e_m_cab_pin.html

[mrugeshpatel_2]

I do have this information, but my question is how do I specify E&M port on the callmanager gateway configuration.