Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Migrating from CCM 4.1.3 to UCM 7.1.3

Hi all,

I am currently running CCM 4.1.3 on a 4-server cluster (1 Pub and 3 Subs) and am planning on migrating to UCM 7.1.3. I am looking for best advices/suggestions, please share your experience if you have gone through this path before.

One of my concerns is I have a 6608 blade connecting to 4 PRIs and several ports configured for conferencing. Is there any compatibility issues between the 6608 and UCM 7.1.3 ?

Thank you very much in advance !!! I appreciate any inputs / suggestions !!!

Danny

3 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: Migrating from CCM 4.1.3 to UCM 7.1.3

This link covers the required minimum ios required for several ISRs and other products

Cisco Unified Communications System Release Summary Matrix for IP Telephony for Enterprise and Midmarket

http://www.cisco.com/en/US/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html#wp1016708

If you have other Cisco software also read the following to make sure eveything is compatible

Cisco Unified Communications Manager Software Compatibility Matrix

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Re: Migrating from CCM 4.1.3 to UCM 7.1.3

Hi Danny,

I just migrated from 4.1.3 to 7.1.3 myself.  Are you using existing hardware?

One item we struggled with was licensing.  There are 3 different types of licensing you require now, licenses for each node in the cluster, licenses for each phone (DLU's - device license units) and a license for the cluster itself (the software feature license).

You'll get credit for your existing nodes and DLU's using the Data Migration Assistant, so make sure you have any extra phones added to the cluster before migrating.

The Data Migration tool worked very well for us and migrated most if not all of our existing configuration flawlessly.  I did run into some issue with call forwarding and CSS's as they seem to be handled a bit differently, but nothing major.

Good luck!

Rob

Community Member

Re: Migrating from CCM 4.1.3 to UCM 7.1.3

Also go through the Hardware compatibily to make sure the hardwar is compatible with the UCM 7.1.3

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_device_support_tables_list.html

And the IOS compatibility of the gateway with the call manager

http://www.cisco.com/en/US/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html

HTH

Vivek

6 REPLIES
Cisco Employee

Re: Migrating from CCM 4.1.3 to UCM 7.1.3

This link covers the required minimum ios required for several ISRs and other products

Cisco Unified Communications System Release Summary Matrix for IP Telephony for Enterprise and Midmarket

http://www.cisco.com/en/US/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html#wp1016708

If you have other Cisco software also read the following to make sure eveything is compatible

Cisco Unified Communications Manager Software Compatibility Matrix

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Re: Migrating from CCM 4.1.3 to UCM 7.1.3

Hi Java !! I appreciate your response !!! are there any gotches or anything that I need to be aware of throughout the process ?

Thanks !!

Danny

Community Member

Re: Migrating from CCM 4.1.3 to UCM 7.1.3

Hi Danny,

I just migrated from 4.1.3 to 7.1.3 myself.  Are you using existing hardware?

One item we struggled with was licensing.  There are 3 different types of licensing you require now, licenses for each node in the cluster, licenses for each phone (DLU's - device license units) and a license for the cluster itself (the software feature license).

You'll get credit for your existing nodes and DLU's using the Data Migration Assistant, so make sure you have any extra phones added to the cluster before migrating.

The Data Migration tool worked very well for us and migrated most if not all of our existing configuration flawlessly.  I did run into some issue with call forwarding and CSS's as they seem to be handled a bit differently, but nothing major.

Good luck!

Rob

Community Member

Re: Migrating from CCM 4.1.3 to UCM 7.1.3

Hi Rob,

I'll be replacing two of the 4 existing servers when migrating to UCM 7.1.3

Thanks

Danny

Community Member

Re: Migrating from CCM 4.1.3 to UCM 7.1.3

Also go through the Hardware compatibily attached to make sure the hardwar is compatible with the UCM 7.1.3

And the IOS compatibility of the gateway with the call manager

http://www.cisco.com/en/US/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html

Community Member

Re: Migrating from CCM 4.1.3 to UCM 7.1.3

Also go through the Hardware compatibily to make sure the hardwar is compatible with the UCM 7.1.3

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_device_support_tables_list.html

And the IOS compatibility of the gateway with the call manager

http://www.cisco.com/en/US/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html

HTH

Vivek

530
Views
0
Helpful
6
Replies
CreatePlease to create content