I need to remove SCCP from a voice gateway 224 and reconfigure it as MGCP. I`ve deleted references to SCCP but the voice port are still SCCP . What is the best way to remove SCCP and so re-configure the GW as MGCP. Is it easier to erase Start up ?
For MGCP, the MGCDefault.cnf and MGC.cnf files are downloaded when a phone is reset. This file contains the image_version parameter that tells the phone which image it should be running. If the image load differs from the one that is currently loaded on the phone, the phone contacts the TFTP server to upgrade to the new image
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...