Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Migration from CME to Cisco CUCM/Voice Gateway

Hello everyone,

I just started studying the Cisco Voice and I would like to ask you some questions.

My scenario is the following:

Two sites: HQ and Branch1

HQ has a CME who manages the ip phones and PSTN for both sites (HQ and Branch communicate via IPSec tunnel).

Now I have to migrate the telephony part from CME to a Cisco UCS located at the Branch1.

How would I accomplish this migration?

What I thought is that I have to configure the CUCM to register the IP Phones, call park, pickup groups, device pools,partition/CSS and translation patterns.

Then I have to configure a router voice (with PVDM and BRI modules) as a voice gateway, configuring dial-peers to call from and to the PSTN.

I have the CME config and I think I could use it to configure the dial-peers for the voice gateway.

I am a bit confused as my first time touching a UCS/Voice gateway so any help is welcome.

If you need more informations, let me know.

Thank you.

Everyone's tags (3)
3 REPLIES
VIP Super Bronze

Migration from CME to Cisco CUCM/Voice Gateway

You are on the right track. You will need to add the gateway also to cucm. You ca ither use h323, mgcp or sip...

Use the links below to configure h323 gateway in cucm

https://supportforums.cisco.com/docs/DOC-24318

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094636.shtml

http://cucmandgwconf.blogspot.co.uk/2012/02/h323-gateway-configuration-and.html

Please rate all useful posts

"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Migration from CME to Cisco CUCM/Voice Gateway

Hi aokanlawon,

Thanks for the reply.

Good to know I am on the right track

I have another question:

Is it possible to simulate a call from PSTN? If yes, what do I need to do?

Migration from CME to Cisco CUCM/Voice Gateway

315
Views
9
Helpful
3
Replies
CreatePlease to create content