Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Missed Call message on phone after group pickup

I have a main 'reception' phone. All calls coming in to this are going to a secondary number. When it rings, we do a group pickup and sieze the call from any of the phones in the office, all good. However, the 'reception' phone shows 1 missed call. How do we stop this happening?

Incidentally this happens when we call internal extensions and do a group pickup; we get the missed call message appearing on the phone that was ringing..

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Missed Call message on phone after group pickup

Hi Davies,

Unfortunately, this behaviour with the "Missed Calls" cannot be changed. This Call History is automatically stored on the phone anytime a call is presented to it (even momentarily).

This is a bit of a pain for our "Shared Line" users as well :( One thing that does mitigate this somewhat is that when scrolling through the "Missed Calls" list, when a number in the list is highlighted you will see;

On xxxx (where xxxx is the actual number that the call came in on, this is breifly displayed right before the Time and Date info)

So,if the 7961 had the following lines;

Line 1 - aaaa

Line 2 - wwww (Shared)

Line 3 - xxxx (Shared)

Line 4 - cccc (Shared)

You could identify when the Missed Call was for aaaa,wwww,xxxx or cccc by looking at the info;

Missed Call from xxx-yyy-ssss

On - cccc (The call was intended for cccc)

Today at 6:53AM

It took awhile for our users to get used to looking at this info to see which line the

"Missed Call" was really intended for.

Now,this is not so much of an issue.

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: Missed Call message on phone after group pickup

Hi Davies,

Unfortunately, this behaviour with the "Missed Calls" cannot be changed. This Call History is automatically stored on the phone anytime a call is presented to it (even momentarily).

This is a bit of a pain for our "Shared Line" users as well :( One thing that does mitigate this somewhat is that when scrolling through the "Missed Calls" list, when a number in the list is highlighted you will see;

On xxxx (where xxxx is the actual number that the call came in on, this is breifly displayed right before the Time and Date info)

So,if the 7961 had the following lines;

Line 1 - aaaa

Line 2 - wwww (Shared)

Line 3 - xxxx (Shared)

Line 4 - cccc (Shared)

You could identify when the Missed Call was for aaaa,wwww,xxxx or cccc by looking at the info;

Missed Call from xxx-yyy-ssss

On - cccc (The call was intended for cccc)

Today at 6:53AM

It took awhile for our users to get used to looking at this info to see which line the

"Missed Call" was really intended for.

Now,this is not so much of an issue.

Hope this helps!

Rob

New Member

Re: Missed Call message on phone after group pickup

Thats a shame, hopefully Cisco may come up with a possible solution for that one day.. Cheers!

Re: Missed Call message on phone after group pickup

In CallManager 4.1 you could edit the 7960 dictionary.xml file and all phones would lose "X missed calls", contact TAC for details.

366
Views
0
Helpful
3
Replies