Missing characters from provider displayed name for external mobile calls
I have a problem in North America. There is a provider that can map names to mobile numbers, so a name is displayed for all mobile calls. That's a nice service that I haven't been in contact with in Europe. Now there is a problem with the name that is displayed on the phone. I can see the 'display name' coming in just fine on the voice gateway in the ISDN traces. However.
1/ When the call arrives on an IP phone the first charachter of the name has dissappeared. So 'John Doe' becomes 'ohn Doe'. This happens for all external mobile calls displayed on ip phones. However.
2./ When the call arrives on an IP communicator the previous example name 'John Doe' becomes ' John Doe'. A little square pops up.
Since the error appeared on 2 types of phones I don't think it's related to a bug in the firmware. I'm thinking about character-encoding schemes. Maybe a callmanager parameter can change this behaviour in a way that would be helpful?
Re: Missing characters from provider displayed name for external
Thanks for the answer. Sorry, forgot to mention, this is a T1 connecting on an H.323 gateway, not MGCP. So there are no 'PRI protocol specifics' to configure. On the H.323 config you can enable the parameter 'Display IE Delivery' and this is enabled, but doesn't solve the problem.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...