Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Missing SEPDEFAULT.cnf and XMLDefault.cnf.xml

I have ereased our flash and installed new IOS and CME 4.2.

The system works, but I get this error when trying to create new cnf-files:

router(config-telephony)#create cnf-files

CNF file creation is already On

Updating CNF files

%Error deleting flash:SEPDEFAULT.cnf (File not found)

%Error deleting flash:XMLDefault.cnf.xml (File not found)

CNF files update complete

Here are my TFTP bindings:

router#show telephony-service tftp-bindings

tftp-server system:/its/SEPDEFAULT.cnf

tftp-server system:/its/SEPDEFAULT.cnf alias SEPDefault.cnf

tftp-server system:/its/XMLDefault.cnf.xml alias XMLDefault.cnf.xml

tftp-server system:/its/ATADefault.cnf.xml

tftp-server system:/its/norway/7960-tones.xml alias Norway/7960-tones.xml

tftp-server system:/its/norway/7960-font.xml alias Norwegian_Norway/7960-font.xml

tftp-server system:/its/norway/7960-dictionary.xml alias Norwegian_Norway/7960-dictionary.xml

tftp-server system:/its/norway/7905-dictionary.xml alias Norwegian_Norway/7905-dictionary.xml

tftp-server system:/its/norway/7960-kate.xml alias Norwegian_Norway/7960-kate.xml

tftp-server system:/its/norway/7960-kate.xml alias Norwegian_Norway/7905-kate.xml

tftp-server system:/its/norway/SCCP-dictionary.xml alias Norwegian_Norway/SCCP-dictionary.xml

The two files that are missing are not on the flash (and have never been, as far as I can see on my backup of the flash).

What should I do?

CreatePlease login to create content