Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Mobile Access Outbound Dialing Issues

CUCM 7.1

Direct H323 transfer

The application is registered and inbound dialing to the pilot number and authentication with pin are working as expected. However, when dialing an outbound number (any number:local,LD, etc. no matter what number is dialed) the application initiates an outbound call to the pilot number causing the call to fail. The CSS on the Remote Destination Profile (both rerouting and CSS) has route patterns to access to the same H323 gateway for call processing.

Has anyone seen this behavior before?

Thank you for your time,

Melissa

1 REPLY
Green

Re: Mobile Access Outbound Dialing Issues

Hi Melissa,

The call will dial the Pilot number but the RDNIS is actually the number MVA access proccess gather to place the new call.

Can you upload detailed CUCM SDI traces with call info and timestamps?

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094e89.shtml#calm

Thanks!

133
Views
0
Helpful
1
Replies