When we called mobile connect number 2XXX, I am pick up the call from PSTN phone, in IP Phone I should get a display "PSTN Phone is used dont pick up the call", Please let me know the procedure to display the Mobile connect info on IP Phone.
The IP phone will not display the text as you've described it below. The IP phone will show the DN in a Remote In Use state. If you have Privacy turned off on the line and Barge or cBarge is properly configured, the IP phone may join the call.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...