Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Mobile Connect when calling from External

I have an interesting problem with Mobile Connect on a Callmanager 6.1.2.

When Mobile Connect is programmed on a extension and a user from outside calls the phone, they hear a single ring and then silence until the call is answered or is sent to voicemail. If I remove the Mobile Connect Profile for the extension, the caller hears the normal cadence of rings. Other testing shows that this does not seem to affect calls from IP phone to IP phone.

Any ideas.

6 REPLIES
New Member

Re: Mobile Connect when calling from External

Any luck w/ a solution on this one? I am seeing the same issue.

Thanks,

J

Hall of Fame Super Silver

Re: Mobile Connect when calling from External

Are you using H323? If so you need to set progress indicators on the dial-peers.

Chris

New Member

Re: Mobile Connect when calling from External

GW is running H323 w/ a "progress_ind setup enable 3" on the voip dial-peers.

Thanks.

New Member

Re: Mobile Connect when calling from External

Did you find a solution to your problem ? I have the same issue.

Louis

New Member

Re: Mobile Connect when calling from External

Have a look at: http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094c33.shtml.

1. Configure the voice call send-alert Cisco IOS global configuration command in the terminating gateway/router.

This command enables the terminating gateway to send an alert message instead of a progress message after it receives a call setup.

HTH, please rate if so.

New Member

Re: Mobile Connect when calling from External

I work fine for me

thank you

155
Views
0
Helpful
6
Replies