Use Bulk administration > Import/Export > Export, check the Call Routing Data/Translation Pattern check box and run the job.
You will get a tar file that you download, open the tar file with 7-zip or similar.
In the file you will find a header.txt file and translationpattern.csv, extract the translationpattern.csv and edit the tr-rules you want to modify, add new tr rules and remove the rules you don't want to change.
Add the translationpattern.csv to your tar file, upload it to the publisher and use Bulk administration > Import/Export > Import to add/update your rules.
Don't think there is any way to bulk delete translation patterns
Not to revive a dead thread but I have a quick question.
If I go ahead and export the translation patterns and lets say another admin adds 5 more translation patterns in that time between me exporting, editing and importing it back to CUCM; will it merge those changes or will it overwrite all the translation patterns and erase those new patterns that were added?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...