Im going to ask this question in here, because it seems the most logical place since most of you have probably seen this before, because of telephony needs. I have a 2821 router and I have a situation where I need to put 8 FXO modules in this router. The first 4 seem easy enough, but the last 4 modules seem to need a larger module to hold the smaller 4 modules in the slot. Im trying to figure out either the name of that larger module or the part number for it, as I cant seem to find it. Any help on that would be appreciated. Plus, does that one larger module host 4 smaller ones?
Thanks, I appreciate the quick response. Yeah, the T1 in this case would be ideal, but its more of a time issue (next week) of getting facilities in. But, this part number you gave is what Im looking for and I appreciate the help. Thanks friend.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...