Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

MOH and RingBack Problems with G729

Hi.

Have a h323 trunk between CME and HiPath of Siemens.

With G711ulaw, the ringback, busy tone and moh it's fine!

We changed the codec to g729r8 and g729br8, so, the MOH don't work by h323 trunk. Any site the ringback dont' work, but the busy tone it's fine. In another sites, the ringback it's ok bu the busy tone no!

All it, just the Cisco to HiPath, in HiPath to Cisco, all the rings and tones are ok! Less MOH.

What's the probable problem?

Thanks

4 REPLIES
New Member

Re: MOH and RingBack Problems with G729

Not sure, but when you uploaded the MOH file to the router did you upload in G711 format (default)? or did you convert the MOH file for G729? just something to check..

New Member

Re: MOH and RingBack Problems with G729

Hi.

I upload the music-on-hold.au to CME

moh music-on-hold.au

But the file play in g711 just. In g729 not!

New Member

Re: MOH and RingBack Problems with G729

There are converters from .wav or .au to g729?

New Member

Re: MOH and RingBack Problems with G729

Hi.

The problem was in the register of MTP.

MTP registered. Problem solutioned.

Thanks

285
Views
0
Helpful
4
Replies
CreatePlease to create content