Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Moh Live Feed using E/M card

Hi All,

I'm wondering if anyone can help me as I'm struggling to get MoH Live feed working through my SRST 3845 router. Config is as follows

voice-port 0/2/0

auto-cut-through

operation 4-wire

signal immediate

!

dial-peer voice 7777 pots

destination-pattern 7777

port 0/2/0

!

!

call-manager-fallback

max-conferences 8

moh-live dn-number 3333 out-call 7777

multicast moh 239.1.1.1 port 16384 route 10.158.81.1 10.255.255.254

show ephone summary:

ephone-1 Mac:001D.457E.A205 TCP socket:[1] activeLine:0 REGISTERED

mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:010.155.34.3 7961

keepalive 28 1:2 CM Fallback

ephone-2 Mac:001D.4595.7D6A TCP socket:[2] activeLine:0 REGISTERED

mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:010.155.34.2 7961

keepalive 25 1:3 CM Fallback

Max 240, Registered 2, Unregistered 0, Deceased 0, Sockets 2

ephone_send_packet process switched 0

Max Conferences 12 with 0 active (8 allowed)

Skinny Music On Hold Status

Active MOH clients 0 (max 820), Media Clients 0, B-ACD Clients 0

No MOH file loaded

MoH Live feed configured from DN 1

MoH Live feed: Good signal

Moh multicast on 239.1.1.1 port 16384 via 10.158.81.1

via 10.255.255.254

I have left and right speaker on the jack plug wired to 600 ohm PAM 10 the output is wired to pins 3 & 6 on the RJ45 E/M connection

Any Ideas?

1 REPLY
Community Member

Re: Moh Live Feed using E/M card

Hi All,

I now have this working it was a Multicast issue. My SRST router and my Phones are on serperate VLAN's and my L3 Switch wasn't passing the multicast traffic.

PIM command on my VLAN interfaces worked

226
Views
0
Helpful
1
Replies
CreatePlease to create content