I have 2 external numbers to different departments that are forwarded to a CTI route point that has 2 lines each one with a different MOH. This CTI route Point, routes the calls to 2 pilot point associated with the same 3 Attendant Consoles. This is done so that when all lines from the AC are occupied, the calls are queued and play different MOH in each external number.
I'm trying to do the same, without the AC, by associating to the hunt group phones instead of AC lines. I have 2 phones with 1 line each, but when they are both busy, a third call hears ringing and not MOH.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...