cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
443
Views
0
Helpful
4
Replies

MOH working internally fine but not externally CCM 6.1

liam_mcd78
Level 1
Level 1

Hi,

Using CCM 6.1.1.2000-3

MOH is configured using multicast and working fine internally, but not working externally.

MOH server is set to increment on IP and have increased max hops from 2 to 4.

Music is fine internally but not externally just get silence.

Any input would be appreciated.

1 Accepted Solution

Accepted Solutions

Under the GW port configuration i.e. PRI in CallManager you need to apply the MRGL under Media Resrouce Group List, and then reset the GW.

Also, add "ccm-manager music-on-hold" on the GW.

Chris

View solution in original post

4 Replies 4

Chris Deren
Hall of Fame
Hall of Fame

Is the voice gateway on the same subnet as the CM server? If not you need to enable pim routing on all netwroks that need to participate in multicast routing.

Also ensure you apply MRGL explicitely on the GW rather than just device pool.

HTH,

Chris

Hey Chris,

Gateways is on same subnet as subscriber, pim routing is enabled on all voice vlans.

Not sure about your second point the voice servers have been set int Media Resouce Group.

How do you set the MRGL on the gateway (gateways are MGCP)

Thanks

Under the GW port configuration i.e. PRI in CallManager you need to apply the MRGL under Media Resrouce Group List, and then reset the GW.

Also, add "ccm-manager music-on-hold" on the GW.

Chris

Chris, disregard my last query found it was right infront of me ; )

Cheers

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: