Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

Monitored Lines in CUCM 7.1

Hi All,

I am currently converting an office from CME to use a centralised a CUCM solution.

Some of the users have monitored lines where the lamp lights when the line is busy. I am trying to configure this for CUCM with no luck, I am using a BLF Speed Dial and choosing the line that I want to monitor. The Subscribe CSS on the phone is correct, but after I modify the button Items to display the configured BLF SD it doesn't display on the phone after a reset.

Are there some configuration steps that I am missing?

Thanks in advance

Phil

4 REPLIES
Bronze

Re: Monitored Lines in CUCM 7.1

Hi Guys,

Does anyone have any experience in BLF Speed dials that could point me in the right direction?

Cheers,

Phil

Bronze

Re: Monitored Lines in CUCM 7.1

Just to let anyone know who is interested that I have solved the problem:

The reason why the BLF SD wasn't appearing/working on the phone was that we use Extension mobility. I didn't have the relevant CSS set up for the end user, I only had it set up on the actual device.

Took me a while to figure that one out!

Phil

Hall of Fame Super Red

Re: Monitored Lines in CUCM 7.1

Hey Phil,

Thanks for posting up your results here +5 for

this kind gesture that will undoubtedly help others

down the road.

Cheers!

Rob

New Member

Old story but always useful

Old story but always useful info !

Put me out of a lot of waste time today.

Thanks !

1920
Views
20
Helpful
4
Replies