i have one 7961 phone with 7914 module.i need to monitor the status of 10 lines from module and need to transfer call if they are not busy.if i configure their line in this module,i will be able to see their call.i dont want this.i just j=need to know whether they are busy on phone or not..
asny option form phone other than attendant console.
i created one new phone button template with 14 lines in SPEEDDIAL/BLF lines.
the i aplied this template to receptionists phone.
then i added 14 lines to this sppeddial/BLF lines .
but cant see any change in recepionists phione.restarted phone.but still same.when there is call in any of these lines or any of those 14 lines are off hook,no status change on receprionists phone 7914 module.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...