I have just installed a MPE. The time is correct but the date is shwoing Monday June 05, 2006. I have a NTP server configured for the time synchronization but it looks like MPE doen't like that. How can I change it to the date of today?
The installation documentation in the bottom of the page 19 says, if you need to modify the dat & time value you need to uninstall everything and start over from the begining. Is this what I have to do? Please let me know if this is my only option because I am already running out of the time and this solution has to be up and runing tomorrow morning.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...