Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Multicast MoH "hub and spoke" not work with call From PSTN.

Hi friends,

sorry but I've got a problem, in the architecture specified in the title, i can't hear MoH only in one site. What can be the problem? i attach some debug. Thanks for all answer!

5 REPLIES
Hall of Fame Super Silver

Re: Multicast MoH "hub and spoke" not work with call From PSTN.

Can you post your GW configuration?

Are you playing MOH from flash or is it multicast traffic to the remote location?

If from flash make sure you have loopback ip address referenced in the "mulicast moh" command.

Chris

Re: Multicast MoH "hub and spoke" not work with call From PSTN.

is from flash, in attach the configuration.

Hall of Fame Super Silver

Re: Multicast MoH "hub and spoke" not work with call From PSTN.

Your configuration looks OK, here are some tips that have worked for me in the past:

remove both moh commands under fallback and add them again

if that does not work try:

remove and re-add "ccm-manager music-on-hold"

if that does not work try:

reboot the router

Chris

Re: Multicast MoH "hub and spoke" not work with call From PSTN.

ok now i try, then I let you know!

Re: Multicast MoH "hub and spoke" not work with call From PSTN.

ok now it working good!

207
Views
10
Helpful
5
Replies